Bathtub

Bathtubs for Real Bathrooms

A bathtub is one of the few bathroom items you cannot resize later, so the size decides everything else. Most Malaysian bathrooms are wet bathrooms, which means the tub has to sit alongside a shower area, a floor trap and a gradient that already exists. Measure the clear space first, then look at what fits. Browse the range below, or bring your bathroom measurements to our showroom and we will work through it with you.

23 Products
Sort

Buying guide

Choosing a Bathtub in Malaysia

A bathtub is the one item in a wet bathroom that has to be planned around, not fitted in afterwards. Size first, then installation.

How to Choose the Right Bathtub Size

Start with the space, not the tub. Measure the clear internal length of the wall the tub will sit against, then the width, then check the door opening and the lift or staircase it has to come through. A tub that fits the bathroom but not the corridor is a common and expensive mistake.

Length is the first decision. Shorter tubs suit apartment bathrooms where the tub shares the room with a shower area; longer ones need a dedicated wall. If your bathroom is tight, look at the internal bathing length rather than the outside dimension, because the rim and the apron eat into it.

Then the shape. A built-in tub sits between walls or inside a tiled kerb, which is the easier and cheaper option in most Malaysian units because it hides the plumbing. A freestanding tub needs clearance on all sides for cleaning, and its waste and overflow have to be planned before the floor is finished.

Depth matters more than people expect. A deeper tub holds more water, but it also means a higher step over the rim. If anyone in the house is elderly or unsteady, that step is the thing to test in person, not on paper.

Come and stand next to a few at our showroom before you commit to a bathtub. Bring the wall measurement and the door width with you.

Where It Goes, and What the Installation Needs

A bathtub is a wet-works item, so the work around it starts before the tiler does.

Waterproofing comes first. The screed under and around the tub needs a proper waterproofing membrane taken up the wall, because the joint between the tub rim and the tiled wall is where leaks start. In a wet bathroom the whole floor is a wet zone, so this is not optional.

The floor trap and the fall of the floor decide where the tub can go. Water has to run away from the tub area towards the trap, not pool against the apron. If the existing fall runs the wrong way, the floor has to be relaid, and that is a bigger job than the tub.

Plan the waste and overflow positions before tiling. Once the screed is down and the tiles are on, moving a waste outlet means breaking the floor.

Water pressure is worth checking early. Filling a tub from a low-pressure gravity feed is slow, and some mixers need a minimum pressure to work at all. If your unit runs on gravity feed, a booster pump is the usual fix. The bath and basin taps that feed it are worth choosing at the same time.

Finally, support. A full tub plus a person is a real load, so a built-in tub needs proper brick or frame support, not just its own feet.

Common questions

What is the standard size of a bathtub?

There is no single standard. Bathtubs are usually described by their external length, and the common range runs from short apartment tubs to full-length ones. What matters is the clear internal bathing length, which is always shorter than the outside dimension. Measure your bathroom wall first, then match a tub to it.

How much space do you need for a bathtub?

Allow the tub's own footprint plus working space. A built-in tub needs the wall run it sits against and enough room to step out safely. A freestanding tub needs clearance on every side so you can clean behind it. Also check the door opening and the route into the unit, because delivery access stops more installations than floor space does.

Can you install a shower screen on a bathtub?

Usually yes, and in a Malaysian wet bathroom it is worth doing. A screen keeps spray off the rest of the room and cuts down the mopping. The screen fixes into the tiled wall and seals against the tub rim, so decide on it before tiling and get the fixing points right.

What is a ceramic bathtub?

In everyday Malaysian use, people say ceramic bathtub when they mean a glazed, hard-surfaced tub rather than a plastic one. The finish is smooth, easy to wipe down and holds its colour. Materials do differ between models, so check the spec of the tub you are looking at rather than assuming.

How do you remove rust stains from a bathtub?

Rust marks usually come from a metal object left sitting on the surface, not from the tub itself. Wipe the surface dry after use and keep razors, tins and wire racks off the rim. For an existing mark, use a non-abrasive bathroom cleaner and a soft cloth. Scouring powder will dull the glaze permanently.

Where do I see the rest of the range?

The tub is one piece of the room. See the rest of our bathroom range, or go straight to basins and shower sets and rain showers.

Visit the showroom